Most wet weather jackets are an afterthought. Thrown together from whatever shell fabric is cheapest, sealed badly if at all, and forgotten about until something goes wrong in the field. The Flinders range is the opposite of that.
Built from the ground up for serious outdoor work, government operations, and anyone who needs a jacket that actually performs when the weather does its worst.
We have been an authorised 3M Distributor and Convertor since 1988. That means every roll of road reflective tape we supply is genuine 3M product, backed by 3M certification, and sourced direct. No grey market stock, no substitutes.
300D polyester TPU laminate shell. Heavy enough to handle real conditions, light enough to wear all day. The TPU laminate bonds directly to the fabric, which means no delamination over time and no performance drop-off after repeated washing.
Shell is dyed with 100% flourescent dye that holds its intensity wash after wash, season after season.
Every seam on every Flinders jacket is fully sealed with RFA seam sealing tape at 20mm width. Not spot sealed, not taped on the outside for show.
Fully sealed, so water has no way in regardless of how long you’re out in it or how many times the jacket has been through the wash.
Chucky 8 on the main zip and Chucky 5 on the pockets as standard. Choose standard resin or TPU coated main zip.
TPU coated zips are seam sealed as part of the same process as the rest of the jacket for complete waterproof integrity.
Custom zips available.
19,500mm hydrostatic head means this shell resists sustained water pressure well beyond anything you’ll encounter in the field. Rain, spray, kneeling in puddles, standing in a downpours for hours.
AWTA tested to EN 343 Class 3:3 and AS/NZS 4602.1 Class D/N. Test reports available on request.
Every Flinders jacket is independently tested by AWTA before it goes to market. Compliant to EN 343 Class 3:3 and AS/NZS 4602.1 Class D/N, with test reports available on request.
Every garment carries an RFA batch number linking it to a full production record. Raw materials, manufacturing sign-offs, QA checks, and dispatch.
Completely free of PFAS, PFOA, and PFOS chemistry. The TPU laminate shell delivers waterproof performance without relying on chemical treatment that break down over time or leave residue in the fabric.
Performance you can rely on, without the chemistry baggage.
ORALITE GP 800 Series retroreflective tape. High visibility in daylight, full retroreflective performance at night.
Screen-printed in-house at Clayton South. Any design, pattern or colour layout can be printed onto the tape.
Applied before seam sealing for a complete waterproof system.
P2 Panel System. Welded PVC with reflective tape and micro hook nylon backing.
Screen printed in-house with ink built for PVC. Won’t lift, peel or fade.
Standard sizes available.
Custom sizes on request.
XS to 5XL as standard. Custom sizes available on request.
Every element can be configured to your specification. All design, printing, and production done in-house at Clayton South.
All finders jackets are tested and rated to 50 wash cycles.
Most wet weather jackets give you two options. Pick a colour, pick a size. That’s it.
The Flinders range doesn’t work like that. Every element is configurable, and because all design, printing, and production happens in-house at Clayton South, there’s nothing stopping us from building exactly what you need.
Tell us what exactly you need.
We’ll create a proof of approval.
Built in-house at Clayton South.
The W1 was designed for operational policing. That means it had to solve problems that a standard wet weather jacket doesn’t bother with.
The W1 was designed for operational policing. That means it had to solve problems that a standard wet weather jacket doesn’t bother with. The W1 runs to approximately 100cm, which means you’re actually covered when:
The outer front pockets open to a second access layer underneath, giving you direct reach to whatever you’re carrying beneath the jacket without lifting the shell in the rain or breaking your waterproof seal.
The W2 is the everyday jacket in the Flinders range. Same 300D TPU laminate shell, same seam-sealed construction, same PFAS-free chemistry as every other jacket in the range.
Designed for site, industrial, and operational use where you need serious waterproofing without a role-specific layout.
The tape option runs ORALITE GP 800 Series retroreflective, screen printed onto our P2 panel system so role identification can be configured to your specification and updated without replacing the garment.
The black colourway gives you a fully seam-sealed waterproof jacket with no compliance markings, which suits roles where hi-vis isn’t the requirement but weather protection still is.
Engineered to perform in the worst weather, for the longest shifts, wash after wash.
Designed, printed, and manufactured in-house at Clayton South, Australia.
Quality materials, proper construction and full traceability. No shortcuts.
Independently tested. Fully compliant. Backed by data and documentation.
Accountability sitting exactly where it should.. With us.
Reflective Fabrications of Australia is an all Australian company specialising in the design, development and manufacture of safety wear, safety signs and related safety items.
Tel: 1300 241 855
34 Murdock Street, South Clayton VIC 3169, Australia
Please fill details to receive the PDF
Fill details and our team will contact you shortly.
